Location:HOME > NEWS > he measure on the image, are approximately

he measure on the image, are approximately

2016-01-18 17:17:48   COMMENT:0 HITS:
  The calculated strength from a Slip On flange under internal pressure is of the order of two-thirds that of Weld Neck flanges, and their life under fatigue is about one-third that of the latter.

  The connection with the pipe is done with 2 fillet welds, as well at the outside as also at the inside of the flange.

  The measure on the image, are approximately:

  Wall thickness of pipe + 3 mm.

  This space is necessary, to do not damage the flange face, during the welding process.

  A disadvantage of the flange is, that principle always firstly a pipe must be welded and then just a fitting. A combination of flange and elbow or flange and tee is not possible, because named fittings have not a straight end, that complete slid in the Slip On flange.

  We would like to introduce ourselves as Manufacturers and Exporters of Pipe Fittings such as flange,flanges ,Carbon steel flanges,Pipe flanges,steel flange,forged flange, We also manufacture special type Bends with PE Coating and fittings as per customer specification and drawings.

previous_pageLarge Size Carbon Steel Slip on Flange
next_pagethe most used flange types acc