What are the stainless steel flange derusting tools?

　　Stainless steel flange is to make the pipe and pipe connected parts, connected to the end of the pipe. There are holes on the flange, and the bolts make the two flanges tightly connected. Stainless steel flange in use for a period of time, there will be some dirt, so how do we generally need to remove rust? What derusting tools are there?

　　Stainless steel flange rust removal tools are as follows:

　　1. Rust hammer

　　It is also called a spade hammer. It usually has two edges, one end is "one" and the other is "│". The blade is about 20 mm wide. It is mainly used to knock out rust, loose oxide scale and old coating on the surface. There is also a sharp hammer with a pointed head, which is used to remove the rust in the deep depression.

　　2. Blade

　　The blade length is about 50 ~ 100cm, made of wood handle or hollow steel pipe, the blade width is 40mm ~ 20cm, made of carbon steel or tungsten steel. It is mainly used to remove rust, oxide scale, old coating and dirt on the plane.

　　3. Scraper

　　Commonly known as "scraping plane", one end is flat, the other is curved, and both ends have blades. It is made of carbon steel, about 20cm long. The function of flat head is the same as that of blade. The elbow is used to remove the reverse side of angle iron and rust and dirt. There is also a pointed scraper with one end of the elbow, which is used to remove rust, putty and other dirt in the gap.

　　4. File

　　It has various shapes, such as plane and triangle, which is mainly used to remove welding slag and other protruding hard objects.

　　5. Wire brush

　　It is divided into long handle and short handle. The end face of the brush is made of thin steel wire, which is used to remove the rust and residue left by scraping with other tools; the other type of steel wire bundle with steel wire at both ends is used for gap and hole.

　　We all need to have the above tools when derusting the stainless steel flange, which can be of great help to our derusting.