Application and Standard of Socket Flange
2019-04-09 09:36:16 COMMENT:0 HITS:
Socket Flange has been widely used in petroleum artificial devices introduced in recent years. Socket Flange is shape is the same as that of flange with neck. Socket Flange has a socket socket on one end of the necked inner hole. The pipe is inserted into the socket and welded in one circle on the back of the socket flange. The other end is connected with other flange by bolts. When using this ASTM A182 F304 Stainless Steel Socket Flange, the inner diameter of the flange should be the same as that of the pipe. Socket flange is only suitable for pipelines with nominal diameter less than 50. Socket flange has no groove, except inner diameter and socket, the other dimensions are the same as those of flat welded flange.
Type: Socket Flange
Socket Flange Standard: HG20597-1997
Socket Flange Standard: HG20592-2009
Socket Flange Standards: GB9117.1-9117.4-2000
Socket Flange Pressure: 1.0-1.6-2.5-4.0-6.3-10.0 Mpa
Socket Flange Path: DN10-50
Socket Flange Material: carbon steel, stainless steel
Socket Flange Sealing face: RF, FM-M, T-G
previous_pageTechnical Requirements for the Manufacture of Weld Neck Flanges
next_pageApplication Scope and Standard of Carbon Steel plate Flange