Location:HOME > NEWS > What are the problems in stainless steel blind flange cutting?

What are the problems in stainless steel blind flange cutting?

2018-08-30 11:39:13   COMMENT:0 HITS:
  Stainless steel blind flange processing, in addition to the need for multi-channel heat treatment process, but also need to use cutting process, the main tool is cutting blades, etc., but the material of stainless steel blind flange cutting is not very simple, stainless steel blind flange cutting attention to the following points

  The hardness of ASME B16.47 A105 Rtj RF Forged Pipe Blind Flange should be considered in cutting, and the resulting cutting is difficult to break, increasing the difficulty of cutting, so three aspects should be considered.

  1. Select cutting parameters according to the hardness of stainless steel blind flange and all kinds of blanks.

  2. Select cutting parameters according to tool material, welding quality and grinding conditions.

  3. Select cutting parameters according to parts diameter, machining allowance and lathe accuracy. Reasonable choice of cutting parameters of stainless steel blind flange will directly affect the production efficiency and processing quality of stainless steel blind flange.

  Therefore, the reasonable choice of cutting parameters of stainless steel blind flange cutting can ensure the production efficiency and processing quality, in the subsequent welding process can also do a good job in the corresponding pad.

previous_pageWorking principle of carbon steel threaded flanges
next_pageCharacteristics and usage of carbon steel weld neck flange

<ALL>