How to solve the problem of processing stainless steel plate flanges?

　　1. select blanking, after completion, enter the next process, stainless steel different parts according to the requirements of processing to enter the corresponding process.

　　2.when bending, we must first according to the size of the drawing, the thickness of the ASME B16.5 A182 F304 Stainless Steel Plate Flange to determine the cutting tool and the knife slot, avoid the plate flange and the tool collision collision caused by the deformation is the key to the selection of the mold (in the same product, may use different models of the model), the selection of the lower die is based on the thickness of the plate.

　　3. In order to soldering firmly, punch the bump on the workpiece to be welded.plate flange can make the bump contact evenly before the electric welding to ensure the consistency of the heating of each point. At the same time, the welding position can be determined and the welding needs to be carried out. It is necessary to adjust the preloading time, keep the pressure time, maintain the time, stop the time, ensure the workpiece can point.