Location:HOME > NEWS > The Introduction of Connection Method of the Part Flange

The Introduction of Connection Method of the Part Flange

2017-11-27 15:50:43   COMMENT:0 HITS:
  Generally speaking, the laying of pipelines has a certain distance. But because of the difficulty of processing or for the convenience of transportation and so on, all the pipeline processing is a section of the appearance in front of the builders. The builders are required to connect the section of the pipe to the length of the construction distance. The parts that make the pipes connect in the best way should be the plate flange. The method of using the High Quality Stainless Steel Plate Flange to connect the pipe is called or is the socket extension shortening pipe link method.

  it is the connection method of the socket-type extension shortening pipe.This connection method is suitable for pipe diameter is Caome 315mm, this pipe diameter is characterized by a rigid connection, can be disassembled at any time, the resistance is relatively large. Now the building in China has a larger development space, in the floor and floor between the vertical pipe, there is a long-distance collection network, and then buried in the underground pipeline installation, must be installed in the last socket-type extension shorten the tube.

  General pipeline installation is a relatively large-scale project, once implemented, it needs to do a long time to use the plan, so must pay attention to the quality of the project. For the more important pipeline connection, the construction personnel should choose the suitable construction method in different construction. Hebei Shengtian Pipe-Fitting Group Co., Ltd.  will provide you with the greatest help.

previous_pageWe specialize in manufacturing blind flange
next_pageBasic Structural Form of Stainless Steel Forged Blind Flange