Location:HOME > NEWS > Cutting of stainless steel flange

Cutting of stainless steel flange

2016-04-28 10:21:57   COMMENT:0 HITS:
  Stainless steel flange during processing, in addition to go through multi-channel heat treatment process, also need to use machining process, the main tool is cutting blades, etc., but for the cutting of the stainless steel flange material is not very simple, want to consider when cutting the hardness of the stainless steel flange, and the resulting cutting hard to break, increased the difficulty of the cutting, should consider the following three aspects.

  First, it is according to the stainless steel elbow and hardness of various types of blank to select cutting parameter;

  Second, it is according to the cutting tool material, the welding quality and tool grinding conditions to select the cutting parameter;

  Third, the diameter is according to the parts, precision lathe and machining allowance to choose cutting parameter. The size of the reasonable choice of stainless steel elbow cutting dosage, the size of the cutting parameter will directly affect the production efficiency and processing quality of the stainless steel elbow. Reasonably choose stainless steel flange cutting when the cutting dosage, can guarantee the production efficiency and processing quality, also can do a good job in the subsequent welding process corresponding stage.

  We have adopted advanced production equipment and technologies to manufacture our weld neck flanges and plate flange, which can not only improve product quality, but also save raw materials. Our products have high strength, good toughness and resistance to corrosion.

previous_pageA spring outing
next_pageASME Flange

<ALL>