The basic processes which have 16mn flange forging

　　16mn flange forging process, there are several common steps, let's look were introduced, first upsetting upsetting is the original axial forging blank so highly reduced cross-section increases during operation . This process commonly used in the forging gear blanks and other disc-shaped forgings. Upsetting into all local upsetting upsetting two. Followed by stretching stretching is to increase the length of the blank forging process to reduce the cross-section is usually used in the production shaft in the rough, such as lathe spindles, connecting rods. Followed by punching in the blank with a punch out of the through-hole or blind hole of forging processes.

　　Followed by the blank of the flange are curved angled or curved shape forging step. Twisting a part of the blank relative to the other portion of the rotating angled forging process. Finally, the cutting or removal of material division head blank forging process.

　　We have adopted advanced production equipment and technologies to manufacture our blind flanges and socket flanges, which can not only improve product quality, but also save raw materials. Our products have high strength, good toughness and resistance to corrosion.